Physically tested modular paint bottle holders: parameterized Blender source, STL exports, print profiles, and geometry checks. CC BY 4.0.
  • G-code 99.2%
  • Python 0.8%
Find a file
Repository files (latest commit first)
Filename Latest commit message Latest commit date
2026-11-13 06:50:27 -05:00
docs feat: publish tested paint bottle hex holder source 2026-10-05 19:18:49 -04:00
models feat: publish tested paint bottle hex holder source 2026-10-05 19:18:49 -04:00
prints/adhesion2 feat: publish tested paint bottle hex holder source 2026-10-05 19:18:49 -04:00
profiles feat: publish tested paint bottle hex holder source 2026-10-05 19:18:49 -04:00
publish/thingiverse-v2 feat: publish tested paint bottle hex holder source 2026-10-05 19:18:49 -04:00
scripts feat: publish tested paint bottle hex holder source 2026-10-05 19:18:49 -04:00
.gitignore feat: publish tested paint bottle hex holder source 2026-10-05 19:18:49 -04:00
AGENTS.md docs(agents): allow pushing docs/specs and critical security fixes 2026-11-13 06:50:27 -05:00
LICENSE.txt feat: publish tested paint bottle hex holder source 2026-10-05 19:18:49 -04:00
README.md feat: publish tested paint bottle hex holder source 2026-10-05 19:18:49 -04:00

Paint Bottle Hex Holder

Modular PLA wall holders for Apple Barrel–style 2 fl oz paint bottles. Each module has an open 35 mm tube at 45°, a hexagonal backplate, and alternating T-tabs and through-slots on a 60 mm grid. Geometry is parameterized in Blender/Python.

Current status — physically tested

On October 5, 2026, the user confirmed that the holder was tested and works great. This supersedes the earlier incomplete-print status. The tested v2 geometry is unchanged. Printer, settings, test duration, and mounting loads were not recorded for this successful test.

Source: paint-bottle-hex-holder on Forgejo.

The STL is published on Thingiverse under CC BY 4.0. That listing was marked Work in Progress when published; the updated test status here does not change the Thingiverse page.

A Thingiverse release package contains the STL, a labeled render, suggested settings, limitations and the selected CC BY 4.0 license. Use the STL for a school printer and slice for that machine.

The original geometry is retained as PaintBottleV1.stl. The previous trial profile and historical notes remain available for comparison. Both STL files were renamed without changing their contents. Model version and settings trial are tracked separately; this is still model v2, settings trial 2.

Validation

Check Result
Exported solid One connected, watertight component; no non-manifold edges
Flat base and tabs Backplate at Z=0; all six tabs span the full 5 mm thickness
Bottle fit geometry Original 35 mm bore retained; usable envelope checked
Keyholes Head passages clear of the tube above the plate
Layer support No floating islands or meaningful >45° advance at 0.1 / 0.2 mm
CuraEngine 5 support diagnostic Supports enabled everywhere at 50°; zero support paths
v2 against v2 and original v1 All six seated neighbor directions pass digital checks
Physical test User reports the holder was tested and works great (October 5, 2026)

The physical result is user-reported; the other rows describe digital checks.

Regenerate

blender --background --python-exit-code 1 --python scripts/generate_module.py
blender --background --python-exit-code 1 --python scripts/check_connector_fit.py
blender --background --python-exit-code 1 --python scripts/check_connector_fit.py -- --legacy-neighbor
python3 scripts/check_print_geometry.py
python3 scripts/build_cura_profile.py
python3 scripts/slice_holder.py
python3 scripts/render_preview.py

Blender 4.3.2 is used here. The system Python geometry check uses NumPy, trimesh, Shapely, spatial-index support, and CuraEngine 5; the preview uses Matplotlib. models/params-v2.txt is generated with the model. Profile source settings are readable in profiles/*.inst.cfg; the profile builder packages them for import without modifying the user's Cura configuration.

Assembly and tuning

Slide modules from the room toward the wall, through the open thickness of the slots. Wide tab heads do not push sideways through narrow slot necks. Use wall screws/anchors for the bottle loads; the interlocks align and stiffen the grid.

Tab thickness now follows plate thickness automatically. The existing per-side width clearance is 0.45 mm and radial clearance is 0.35 mm. Leave those dimensions unchanged as the tested baseline. If tuning for another printer is needed, adjust tab_clearance_mm or tab_depth_clearance_mm in the generator and update the specs.

The two keyhole centers are now 50 mm apart at wall-view mid-height; their previous positions were 38 mm apart and higher. Account for that when laying out screws.

See specifications, print instructions, and references and prior art. Interlock inspiration remains the user's FIgure Hex Storage.

License

CC BY 4.0, selected by the user for public sharing on September 27, 2026.